M32T-1, as specified.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-PRF-26139D

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4 and 5 of this

specification. This section does not include documents cited in other sections of this specification

or recommended for additional information or as examples. While every effort has been made to

ensure the completeness of this list, document users are cautioned that they must meet all

specified requirements documents cited in sections 3, 4 and 5 of this specification, whether or

not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified,

the issues of these documents are those cited in the solicitation or contract.

FEDERAL STANDARDS

FED-STD-595/24052

Green, Semigloss

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-26521

Hose Assembly, Nonmetallic, Fuel, Collapsible, Low

Temperature with Non-Reusable Couplings

AN929

Cap Assembly, Tube, Pressure Seal

AN6270

Hose Assembly -- Detachable Swivel Fitting, Low Pressure.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-461

Requirements for the Control of Electromagnetic Interference

Characteristics of Subsystems and Equipment

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or

https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins

Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2.2 Other Government documents, drawings, and publications. The following other

Government documents, drawings, and publications form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

AIR FORCE DRAWINGS

50B6228

Adapter Assembly-Inlet Pressurization Test, 3-inch Hose, 2 3/8 --12

Fitting.