MIL-PRF-83323C
2.3 Non-Government publications. The following document forms a part of this document to the extent specified herein.
Unless otherwise specified, the issues of the documents which shall be DoD adopted are those listed in the Acquisition
Streamlining and Standardization Information System (ASSIST) database, cited in the solicitation. Unless otherwise
specified, the issues of documents not listed in the ASSIST database, cited in the solicitation (see 6.2).
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASTM D 471
Standard Test Method for Rubber Property Effect of Liquids
(ASTM standards may be obtained from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West
Conshohocken, PA 19428-2959. Electronic copies of ASTM standards may be obtained from https://www.astm.org )
XAR INDUSTRY DRAWING
XAR INDUSTRIES 7034
RECEPTACLE, UNIVERSAL, UARRSI
(Copies of the above drawing are available by contacting X A R Industries Inc, 711 E Walnut St Ste 102, Pasadena, CA
91101-4401)
SOCIETY AEROSPACE ENGINEERING (SAE)
SAE-ARP 868
Pressure Drop Test for Fuel system Components
SAE-AS31061
Connector, Plug, Electric, Straight, Solder Contacts, AN Type
SAE-AS50151
Connectors, Electrical, Circular Threaded, AN Type, General Specification for
SAE-AS5877
Detailed specification for aircraft pressure refueling nozzle.
(SAE documents may be obtained at https://www.sae.org/servlets/index or from SAE, Inc., 400 Commonwealth Drive,
Warrendale PA 15096.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of
this document and the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First Article. First article testing is required unless otherwise specified.
3.2 Components. The tester and its container shall consist of the following components which shall be integral or
included parts of the assembly:
Tester
a. Universal Aerial Refueling (AR) Nozzle
b. Nozzle Dust Cover
c. Pressure Fuel Servicing Adapter
d. Adapter Dust Cap
e. Body (Reducer) with Bleed Valve Provisions
f. Handle Assembly
g. Electrical box
(1) Oscilloscope connector
(2) Telephone jack or other suitable headset connection
(3) Electrical harness and connector
(4) Recharging connection
(5) On-off/reset switch
(6) Voltmeter and voltage switch
(7) Indicator lights
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business